A classic look with Traditional Timber Oil
See how @coastal.hills.haven enriched her deck using Feast Watson Traditional Timber Oil
Our timber decks go through a lot. They're exposed to the whole spectrum of weather conditions, harsh UV rays, stains left behind by barbecue gatherings and general wear and tear. Never fear, the hope of returning your deck to its former glory is far from lost. Restoring your deck to its classic charm is easier and quicker than you might think with Feast Watson Traditional Timber Oil.
Renée from @coastal.hills.haven used our Traditional Timber Oil in Natural to enrich and protect her half-covered timber deck. Our decking oil preserves your outdoor timber's charm, offering a classic finish with a quick 1-hour recoat time for easy application. Its penetrating formula ensures an even finish without flaking or peeling. The result? A traditional look that enhances the natural look of the timber and protects it from the elements.
What you'll need
Feast Watson Traditional Timber Oil
Colour
Natural
Feast Watson Woodclean™
Pressure washer
Bucket
Stiff bristle brush
Stirrer
Applicator brush or pad
Paint Brush
Safety gear (Protective Glasses, Clothing, Ear coverings and a mask)
Time to prep
- Sweep away any dirt, leaves and debris before removing stubborn marks with a pressure washer.
- Prep timber with Feast Watson Woodclean by mixing 1 part with 4 parts water in a bucket.
- Wet the timber and apply the Woodclean solution, scrubbing with a stiff bristle brush. Allow it to penetrate the timber for 20 minutes before washing away.
Coat with Traditional Timber Oil
- Stir Feast Watson Traditional Timber Oil thoroughly before and during application. Take care to avoid introducing any bubbles.
- Apply your first coat of Feast Watson Traditional Timber Oil along the lengths of the timber boards, working along 3-4 boards at a time.
- Use a brush to coat any areas that require closer attention like the timber ends or edges.
- Let the oil penetrate the timber for 30 minutes before wiping off any excess product with a dry applicator or cloth before your timber becomes tacky.
- Let your timber dry for another 60 minutes.
- Apply a second coat following the above steps.
- Leave the deck to dry for 18 hours before walking across it or styling.
There you have it...
The secret to returning the traditional charm to your timber deck. Find your nearest stockist and enrich your exterior timber with a classic oiled look.
Related Guides
The quickest way to a traditional finish
Enrich your space with a traditional choice that highlights the timeless beauty of timber with Feast Watson Traditional Timber Oil.
Enrich your deck with Traditional Timber Oil
Achieving the look of a classic oiled deck is quicker and easier than you might think! You just need Feast Watson Traditional Timber Oil with its high durability, easy application and 1 hour recoat time.
