Proofseal

Achieve your timber renovation masterpiece with Feast Watson Proofseal penetrating sealer.

Proofseal locks in timbers tannin and oils, ensuring your timber never loses its colour and adhesion caused by natural oils leaking over time.

Our Timber Sealer is perfect for naturally oily timbers such as Spotted Gum, Brush Box and Tallowwood, Proofseal reduces any tendency for lighter coloured timbers to darken once they are top coated.

Gain your beautiful timber finish, knowing your timber is protected with Proofseal.

Note: Proofseal can be overcoated with Feast Watson Clear Varnish, WeatherProof Varnish, FloorProof Pro, FloorSeal Oil, FloorClear, Floor Paint, Liming White Floor Finish, Black Japan Floor Finish and Crackle Lacquer.

Proofseal should NOT be used under Feast Watson Woodshield Oil, Decking Oil, Decking Stain, Outdoor Furniture Oil or Tung Oil.

Safety Data Sheet

Find a stockist

WHERE TO USE

Timber and cork flooring, parquetry, timber benchtops, stairways, handrails, furniture, doors and trim.

FINISH

Satin

COVERAGE RATE

8m² per litre

NUMBER OF COATS

Bare Timber: 2

RECOAT TIME

Recoat after 12 hours

DRY TIME

Light Foot Traffic - 24 hours
Normal Traffic - 72 hours
Full Curing after 7 days

CLEAN UP

Mineral Turpentine. Soak application cloths in water prior to disposal.

SIZES

250ML, 1L

How to prepare Feast Watson Proofseal:

Before you get coating... Let's prepare your timber!

New Timber
How to prepare new timber with Proofseal:

Sand to a smooth surface and remove all sanding dust before coating.
Look to achieve a super-smooth finish? Apply a coat of Feast Watson Sanding Sealer and sand back as per the directions prior to applying Proofseal.

Previously Coated Timber
How to prepare previously coated timber:

If your timber has been previously varnished, you need to sand back to bare timber to ensure the best results. Remember to remove all sanding dust before coating!

How to apply Feast Watson Proofseal:

Let's do this!

Make sure to stir Proofseal thoroughly before and during application with a flat blade stirrer.
Apply a flood coat using a brush, roller or spray. Ensure edges and end grain are fully coated.

Do you have porous timbers? Apply a second coat using a spray, allowing for 20 minutes between coats.

To you have open grain timbers? Sand back the first coat prior to applying the second coat. Wait 20 minutes prior to applying finishing coating.

Great job, you're ready to go!

Sanding Sealer

A fast drying timber floor slealer used to fill the timber grain and providing a smooth finish.

Prooftint

Timber stains available in 13 colour choices that are quick and easy to apply.

PREPARATION

How to prepare Feast Watson Proofseal:

Before you get coating... Let's prepare your timber!

New Timber
How to prepare new timber with Proofseal:

Sand to a smooth surface and remove all sanding dust before coating.
Look to achieve a super-smooth finish? Apply a coat of Feast Watson Sanding Sealer and sand back as per the directions prior to applying Proofseal.

Previously Coated Timber
How to prepare previously coated timber:

If your timber has been previously varnished, you need to sand back to bare timber to ensure the best results. Remember to remove all sanding dust before coating!

APPLICATION

How to apply Feast Watson Proofseal:

Let's do this!

Make sure to stir Proofseal thoroughly before and during application with a flat blade stirrer.
Apply a flood coat using a brush, roller or spray. Ensure edges and end grain are fully coated.

Do you have porous timbers? Apply a second coat using a spray, allowing for 20 minutes between coats.

To you have open grain timbers? Sand back the first coat prior to applying the second coat. Wait 20 minutes prior to applying finishing coating.

Great job, you're ready to go!

Proofseal

WHERE TO USE

FINISH

COVERAGE RATE

NUMBER OF COATS

RECOAT TIME

DRY TIME

CLEAN UP

SIZES

Sanding Sealer

Prooftint

PREPARATION

APPLICATION

RELATED PRODUCTS

Sanding Sealer

Prooftint

Get the Look

Black Japan Style Guide

Liming White