Liming White Floor Finish

Create a new airy, bright feel to any room with the Liming White Floor Finish.

This traditional whitewash stain has professional clear polyurethane for a one-step finish and durable protection for interior timber floors.

You can trust that our Liming White Floor Finish will not yellow over time and have the flexibility to build your opacity and whiteness. You can be the designer!

With your new whitewash floorboards and timber, you can achieve that calming, bright sophisticated look.

Safety Data Sheet

Find a stockist

WHERE TO USE

Bare timber and cork flooring (existing timber must be sanded back to bear before applying Liming White Floor Finish)

COVERAGE RATE

8m² per Litre

NUMBER OF COATS

Bare Timber: 3

RECOAT TIME

Recoat after 2 hours

DRY TIME

Light Foor Traffic - 24 hours
Normal traffic - 72 hours
Full Curing after 7 Days

CLEAN UP

Water Clean Up

SIZES

4L & 10L

How to prepare your Floor Finish:

Final steps, here we go:

New Timber:

How to prepare new or bare timber/cork:

Punch exposed nails below the surface. If you have any holes and imperfections, they should be filled with timber putty.
Sand timber to an even, smooth surface. Remember to vacuum and wipe to remove dust.
NOTE: Prepare uncoated cork tiles in accordance with the supplier's recommendation.

For best results, seal uncoated or tannin rich timber with Feast Watson Proofseal and allow to dry thoroughly before applying Liming White Floor Finish.

Previously Coated Timber

How to prepare previously coated timber:

Sand back your coated surface back to bare timber. Remember to remove all sanding dust before coating!

How to apply your Liming White Floor Finish:

Let's get that white, airy feel...

Without introducing any bubbles, use a flat blade stirrer and thoroughly stir your product both before and during application.
Note: If you are coating a large space and need more than one Floor Finish colour, mix all together in a large container.
Make sure you love your colour choice! Test your colour on an off-cut to ensure you love your colour.
Using the Feast Watson Floor Finish Applicator, brush or short nap mohair roller, apply your first coat. Work along 3-4 floorboards at a time, maintaining a wet edge to prevent lap marks and lay off in the direction of the grain. And remember, avoid introducing any bubbles!

The Black Japan Floor Finish is a three-coat flooring system. If you have achieved your colour before 3 coats that's okay! Finish off your floor with the Feast Watson Floorclear as per label instructions, and you're good to go.

Note: With each coat, achieves a darker and stronger Black Japan colour. Continue applying coats by the above procedure, sanding between coats, until the your colour is achieved.

How to maintain my floor using Liming White Floor Finish:

Follow these steps to ensure your maintain your beloved colour…

1. Regularly clean using Feast Watson Floorclean.
2. Ensure you keep an eye on your floor for signs of colour loss or surface defects.
3. When floor requires an additional coat of Liming White Floor Finish, apply as per the instructions for Previously Coated Surfaces.

DOWNLOAD PDF GUIDE

Floor Clear

A clear polyurethane floof varnish available in satin and gloss for a tough timber floor protection.

Floor Clean

Floor Clean is a high quality every day cleaning solutions forumulated specifically for timber floors.

Floor Polish

Floor polish is ideal to rejuvinate shine and provide protection to timber floors.

PREPARATION