Feast Watson Scandinavian Oil™
Zoom
Create your very own golden hour, every hour, with Feast Watson Scandinavian Oil™.
With its warm tones and elegant satin finish, highlight the natural beauty of your raw timber using a clear blend of penetrating oils and resins.
The result? A scratch and blemish-free surface.
This is a Danish oil with a difference because it’s suitable for use on interior woodwork, including furniture, architraves, trims, cedar blinds and panelling, imparting a special satin, Scandinavian oil finish.
Tip: For fantastic results, use Wet Dry Sandpaper to achieve the smoothest lustre.
Note: Our Scandinavian Oil™ is suitable for use with Feast Watson Prooftint™ and can be used as a topcoat over our oil-based Liming White for a protective finish.
| Projects |
|
|---|---|
| Sizes |
|
| Where to use |
All interior woodwork including furniture, architraves, trims, cedar blinds and panelling. May be applied directly to raw or previously coated timber. |
| Coverage rate |
15m² per litre |
| Clean up |
Mineral Turpentine. Soak application cloths in water prior to disposal. |
| Finish |
Satin |
| Number of coats |
1 - 2 Coats |
| Dry time |
12 hours |
How to prepare your timber for Feast Watson Scandinavian Oil™:
Let's prepare your beautiful timber.
How to prepare new timber:
Sand to a smooth surface and remove all sanding dust before coating.
To achieve a super-smooth finish, apply a single coat of Feast Watson Sanding Sealer and sand back as per the directions.
How to prepare previously coated timber:
Just one simple step:
Clean previously varnished surfaces with Feast Watson Floor Clean and allow to dry.
How to apply Feast Watson Scandinavian Oil:
Ensure your surfaces are dry and free from dirt, dust, grease, wax and oil.
Scandinavian Oil should be stirred thoroughly before and during application with a flat blade stirrer taking care not to introduce bubbles.
Okay, let's do this! Follow these steps to learn how to clear coat using our Scandinavian Oil.
Apply a coat of Scandinavian Oil using a clean, soft cloth or pad, which is thoroughly saturated, or apply with a brush and then work the Scandinavian Oil into the timber with a clean, soft cloth or pad.
Apply using a scouring pad or fine steel wool (000). Make yourself a coffee and allow the Scandinavian Oil to penetrate for 30 minutes.
When the surface gets tacky remove excess surface oil with a clean dry cloth. Make sure to allow for 8 hours between coats.
Apply further coats until the desired finish is achieved. Three or four coats are recommended for a satin or gloss look and durable protection. The more coats you apply, the higher the level of sheen.
Scandinavian Oil becomes marr proof after approximately 8 days.
Note: Scandinavian Oil does NOT require thinning
How to maintain your timber after using Feast Watson Scandinavian Oil:
Ensure your timber maintains its shine by following these simple steps.
Ensure the surface is dry and free of dirt, dust, oil and grease.
Using a brush, pad or clean soft cloth, apply one coat of Scandinavian Oil and allow to dry.
Do not pour leftover product down the drain.
Brush leftover product onto newspaper, and allowed to completely dry, before disposing of via general waste collection.
Empty containers should be left open in a well-ventilated area to dry out. When dry, recycle the container through steel can recycle programs such as Paintback.
Feast Watson Scandinavian Oil™
Classic Scandinavian finish
Enhances interior timber beautifully
Suitable with Prooftint™ & Liming White
Select colour range
Colour - Clear
