Feast Watson Proofseal™
Zoom
Preserve your wood flooring's beauty with Feast Watson Proofseal™, a lasting floor sealer that maintains color and adhesion.
Its penetrating formula locks in the tannin and oils of timber that naturally dissipate over time.
Coat over with Feast Watson Clear Varnish, Weatherproof, Timber Floor Wax, Timber Floor Varnish, Timber Floor Paint, Timber Floor Stain & Varnish Liming White and Timber Floor Stain & Varnish Black Japan.
Use on timber and cork flooring, parquetry, timber benchtops, stairways, handrails, furniture, doors and trim. Proofseal™ has a satin finish.
Not suitable with Feast Watson Wood Shield™ Oil, Decking Oil, Decking Stain, Outdoor Furniture Oil or Tung Oil.
| Projects |
|
|---|---|
| Sizes |
|
| Where to use |
Timber and cork flooring, parquetry, timber benchtops, stairways, handrails, furniture, doors and trim. |
| Recoat time |
12 hours |
| Coverage rate |
10m² per litre |
| Clean up |
Methylated Spirits. Soak application cloths in water prior to disposal. |
| Finish |
Satin |
| Number of coats |
Bare Timber: 2 |
| Dry time |
20 minutes |
How to prepare your timber for Feast Watson Proofseal™:
Before you get coating, let's prepare your timber.
How to prepare new timber:
Sand to a smooth surface and remove all sanding dust before coating.
Look to achieve a super-smooth finish? Apply a coat of Feast Watson Sanding Sealer and sand back as per the directions prior to applying Proofseal™.
How to prepare previously coated timber:
If your timber has been previously varnished, you need to sand back to bare timber to ensure the best results.
Remember to remove all sanding dust before coating.
How to apply Feast Watson Proofseal™:
Let's do this!
Make sure to stir Proofseal™ thoroughly before and during application with a flat blade stirrer.
Apply a flood coat using a brush, roller or spray. Ensure edges and end grain are fully coated.
Porous timber: For porous timber, apply a second coat using a spray, allowing for 20 minutes between coats.
Open grain timber: For open grain timber, sand back the first coat prior to applying the second coat. Wait 20 minutes prior to applying finishing coating.
Great job, you're ready to go!
How to maintain my timber after using Proofseal™:
Keep an eye on your timber for signs of colour loss or surface defects.
When required, sand back the previous coating and remove dust.
Apply Proofseal™ as per application instructions.
Apply desired finish.
Do not pour leftover product down the drain.
Brush leftover product onto newspaper, and allowed to completely dry, before disposing of via general waste collection.
Empty containers should be left open in a well-ventilated area to dry out. When dry, recycle the container through steel can recycle programs such as Paintback.
Feast Watson Proofseal™
Locks in tannin & natural oils
Improves timber stability before topcoating
Suitable for floors, furniture & benchtops
