How to apply Wet Look Decking Oil to your deck:

So, how do you make your deck look industry standard? Let’s see!

Before you get started, you need to ensure the following:

• Your timber is completely dry before applying the Wet Look Deck Oil.
• Wet Look Deck is thoroughly stirred through before starting (and during!). Avoid introducing any bubbles!
• If you are coating a large space and need more than one Deck Oil, mix both cans together in a large container.
• Make sure you only use the best tools such as a quality synthetic or pure bristle brush or lambswool applicator. Please don’t use a roller! We only want the best for your deck.

Alright take your product and your brush and let’s apply your timber oil:

• Apply your first coat of Wet Look Deck by walking along 3-4 planks at a time, in the same direction as the grain of the deck.
• Don’t forget about your edges! They need to be fully coated.
• Note: You don’t have to be cautious about how much to use – the more the merrier!
• Leave your deck to dry for 4 hours. Go make yourself a cup of tea, put your feet up and read a book.
• Once you have finished a few chapters, apply a second coat as above.

If your timber is in direct sun exposure, around pools and in humid areas, we recommend a third coat.

If you want the best 'Wet-Look' for your deck, apply three coats. A third coast will increase the Gloss Level of your finish.

How to I maintain my deck after using the Wet Look Deck Oil?

You’ve finished! Well done. Now, how do you keep your deck looking it’s best?

• Regular check on the coated timber to look for any colour loss, dryness or weathering. If this occurs, recoat the timber and it will return to its original glossy beauty.
• If you recoat, don’t forget to clean your deck first using Woodclean!