Water Repellent Timber & Deck Oil

Colour
Clear
Size
4L
While it may be left to its own devices in the wild, domesticated timber needs a helping hand when it comes to weathering. That’s where our clear decking oil makes all the difference.
Feast Watson Water Repellent Timber & Deck Oil's, penetrating formula helps exterior timber grey naturally over time, while protecting it from water damage.
Find In-Store
Select timber
Number of coats
2

Where to use

All exterior timber.

Coverage rate

Softwood 6-8m² per Litre. Hardwood 8 - 10m² per Litre.

Number of coats

Bare Timber: 2

Recoat time

Allow at least 2 hours to penetrate. Coating does not need to fully dry before applying subsequent coats

Dry time

18 hours

Clean up

Mineral Turpentine Clean up

Size

4L

You may also need

Feast Watson Woodclean
Feast Watson Woodclean™

How to prepare your deck for Wet Look Decking Oil:

Before you get coating, let's prep!

New Timber How to prepare new timber:

  1. Allow your new timber to weather for 4-6 weeks before applying.

  2. Ensure your deck is clean and ready to go by applying Feast Watson Woodclean.

  3. For best results, lightly sand your timber to remove any grain rise. And remember, remove any leftover dust before coating!

Weathered Timber How to prepare weathered timber:

  1. Ensure your deck is clean and ready to go by applying Feast Watson Woodclean.

  2. For best results, lightly sand your timber to remove any deterioration. Make sure to remove all leftover sand before coasting!

Previously Coated Timber How to prepare previously coated timber:

Let's change it up...

If your deck already has stain or oil, don't worry. Conduct a simple test to see if your surface is ready by sprinkling water onto your deck:

  • If the water absorbs - you're good to go!

  • If the water beads, you may need to let your deck further weather, or requires you to either sand or strip your deck.

Painted or varnished surfaces:

  1. Before coating, you must bring your timber back to bare timber by stripping or sanding your deck.

  2. Clear away any sanding dust before proceeding.

Get expert advice and info, straight to your inbox

Sign up to our monthly newsletter to receive helpful project advice, how-to guides, inside information and more.