Timber Floor Wax

Timber Floor Wax is a natural looking, hard wax oil technology that enhances the natural look of timber floors yet hard wearing with a sumptuous matt finish. Timber Floor Wax is suitable for interior timber flooring, parquetry and furniture. You can protect your interior timber and flooring with a beautiful matt finish that will enhance the natural beauty of the timber without adding shine.

Feast Watson Timber Floor Wax is easily maintained without needing to sand prior to recoating.

Feast Watson Timber Floor Wax is compatible to be used over the top of timber floors already coated in Feast Watson Floorseal Oil. Floors previously coated in Feast Watson Floorseal Oil that require a maintenance coat can easily be prepared and recoated with Timber Floor Wax to achieve protective and natural matt finish floor.

FEAST WATSON TIMBER FLOOR WAX AUS GHS

Find a stockist

WHERE TO USE

Ideal for interior timber flooring, parquetry and furniture

RECOAT TIME

Recoat after 6 hours

FINISH

Hard wearing natural clear

DRY TIME

Touch dry after 3 hours.

Light foot traffic after 24 hours.

Heavy traffic after 72 hours.

7 days to fully cure.

COVERAGE RATE

Softwood up to 20m² per litre
Hardwood up to 24m² per litre

CLEAN UP

Mineral turpentine. Soak application cloths in water prior to disposal.

NUMBER OF COATS

Bare Timber: 2

SIZES

1L 4L

PREPARATION

• Punch exposed nails below the surface.Note that holes and imperfections should be filled with timber putty after the first coat of TIMBER FLOOR WAX to match the putty colour with the coated timber colour.

• Sand timber to an even, smooth surface. Vacuum and wipe to remove dust.

Previously Coated Surfaces

• Previous coatings need to be removed by sanding surface back to bare timber.

• Previous coatings of TIMBER FLOOR WAX or FLOORSEAL OIL can be recoated without resanding.

APPLICATION

• Surfaces to be coated must be dry and free from all dirt, dust, grease or polish.

• TIMBER FLOOR WAX should be stirred thoroughly before and during application with a flat blade stirrer taking care not to introduce bubbles.

• Apply a coat of TIMBER FLOOR WAX to the timber with a brush, roller or cloth. Ensure the surface is evenly covered.

• Once first coat is thoroughly dry, any grain raise can be removed by lightly sanding with 240 grit sandpaper, being careful not to sand through the coating.

• When the first coat is thoroughly dry. Apply a second coat of TIMBER FLOOR WAX following the application process outlined above.

• Do NOT apply in temperatures under 10°C or over 35°C.

Allow TIMBER FLOOR WAX to cure for a minimum of 4 weeks before cleaning.

• Regularly clean floors using Feast Watson® FLOORCLEAN™.

• When surface requires an additional coat, clean with Feast Watson® FLOORCLEAN and allow surface to dry fully. Apply one coat of TIMBER FLOOR WAX as per application directions.

Floor Finish Replacement Sock

A replacement sock for the Feast Watson Floor Finish Applicator.

Floor Clean

Floor Clean is a high quality every day cleaning solutions formulated specifically for timber floors.

Floor Polish

Floor polish is ideal to rejuvinate shine and provide protection to timber floors.

PREPARATION

PREPARATION

• Sand timber to an even, smooth surface. Vacuum and wipe to remove dust.

Previously Coated Surfaces

• Previous coatings need to be removed by sanding surface back to bare timber.

• Previous coatings of TIMBER FLOOR WAX or FLOORSEAL OIL can be recoated without resanding.

APPLICATION

APPLICATION

• Surfaces to be coated must be dry and free from all dirt, dust, grease or polish.

• TIMBER FLOOR WAX should be stirred thoroughly before and during application with a flat blade stirrer taking care not to introduce bubbles.

• Apply a coat of TIMBER FLOOR WAX to the timber with a brush, roller or cloth. Ensure the surface is evenly covered.

• Once first coat is thoroughly dry, any grain raise can be removed by lightly sanding with 240 grit sandpaper, being careful not to sand through the coating.

• When the first coat is thoroughly dry. Apply a second coat of TIMBER FLOOR WAX following the application process outlined above.

• Do NOT apply in temperatures under 10°C or over 35°C.

MAINTENANCE

Allow TIMBER FLOOR WAX to cure for a minimum of 4 weeks before cleaning.

• Regularly clean floors using Feast Watson® FLOORCLEAN™.

• When surface requires an additional coat, clean with Feast Watson® FLOORCLEAN and allow surface to dry fully. Apply one coat of TIMBER FLOOR WAX as per application directions.

RELATED PRODUCTS

Floor Finish Replacement Sock

A replacement sock for the Feast Watson Floor Finish Applicator.

Floor Clean

Floor Clean is a high quality every day cleaning solutions formulated specifically for timber floors.

Floor Polish

Floor polish is ideal to rejuvinate shine and provide protection to timber floors.

Floorseal Oil

A durable and resistant satin finish floor coating to nourish and protect timber floors.

Liming White Timber Floor Stain & Varnish

A beautiful white wash floor stain and varnish that provides durable protection for timber floors.

Timber Floor Varnish

A clear polyurethane floor varnish available in satin and gloss for a tough timber floor protection.

Get the Look

Vintage Dining Table | Get the look

Hunting down that perfect vintage find requires patience and skill (and the odd bit of elbow-nudging at the flea market). Our range of stains and varnishes are perfect for upgrading your existing furniture to get the vintage look by doing it yourself instead!

View post

Liming White

They say white is a great base, but who says you can’t stop there?

View post

Black Japan Style Guide

Your interior and exterior areas will be the feature of your home with this warm, deep colour and sophisticated style.

View post