Slate & Pebble Sealer™

While we may have a passion for woodcare, there’s no question that slate, pebbles, and stone deserve our equal respect. That’s why we’ve developed Feast Watson Slate & Pebble Sealer™.
Find In-Store

Where to use

Slate and pebble floors, bathrooms, foyers, driveways, steps, pathways



Coverage rate

10m² per litre

Number of coats

2 Coats

Recoat time

2 hours

Dry time

8 hours

Clean up



1L, 4L, 10L

You may also need

Paving & Sandstone Sealer
Feast Watson Paving & Sandstone Sealer

How to prepare your surface for Feast Watson Slate and Pebble Sealer:

Preparation is key before you start coating:

  1. Ensure your surface is thoroughly clean and free from oil, grease, dirt and moss prior to applying.

  2. Clean the surface with Feast Watson Floor Clean as per the product instructions.

For new concrete and aggregate pebbles:

  1. Allow the surface to cure for approximately 28 days, then treat surface with a 10% solution (dilute) of Hydrochloric Acid.

  2. Apply Hydrochloric Acid using a brush or mop, allow the acid to remain on the surface for 15 minutes then flush off with clean water.

  3. Allow the surface to dry completely before applying Slate and Pebble Sealer.

Get expert advice and info, straight to your inbox

Sign up to our monthly newsletter to receive helpful project advice, how-to guides, inside information and more.