Feast Watson Surface Restore
Zoom
Bring your timber back to basics with Feast Watson Surface Restore.
With its combination of hard-drying beeswax, carnauba wax and Tung oil, this wonder-product restores tired and worn-out coated interior timber surfaces with a deeply penetrating formula without the need to sand or strip it back.
The result? A protective, satin finish or buff out to a higher gloss.
Ideal for all interior woodwork, worn furniture, cabinets and trims.
| Projects |
|
|---|---|
| Sizes |
|
| Where to use |
Ideal for worn furniture, cabinets, trims and all interior woodwork. |
| Recoat time |
12 hours |
| Coverage rate |
20m² per litre |
| Clean up |
Mineral Turpentine. Soak application cloths in water prior to disposal. |
| Finish |
Satin - Gloss |
| Number of coats |
1 Coat |
| Dry time |
24 hours |
How to prepare your timber for Feast Watson Surface Restore:
Before you start coating, let's prep.
How to prepare previously coated timber:
Ensure your surface is clean by applying Feast Watson Floor Clean and allow to dry.
How to apply Feast Watson Surface Restore:
Okay, let's do this! Follow these steps on how to clear coat using Surface Restore:
Ensure your surface is completely dry and free from dirt, dust, grease, wax and oil.
Using a nylon scouring pad or fine steel wool (000), apply Surface Restore. Apply in the direction of the grain. Note: For soft timbers such as pine, apply using a soft cloth.
Allow Surface Restore to penetrate 10 - 20 minutes, and go make yourself a coffee! When you come back, check if the surface is tacky. If so, wipe vigorously with a coarse cloth.
Leave for approximately 5 hours then buff surface with a soft clean cloth.
If you are looking for an increased level of sheen or glow, repeat the process by using a soft cloth to apply Surface Restore.
How to maintain your timber after using Surface Restore:
How do I keep my timber looking its best?
Keep an eye on your timber, checking regularly for any deterioration.
If you feel your timber needs rejuvenation, wash with sugar soap and water, or Mineral Turpentine and a scouring pad, then reapply Surface Restore as outlined in the application directions.
Good as new!
Do not pour leftover product down the drain.
Brush leftover product onto newspaper, and allowed to completely dry, before disposing of via general waste collection.
Empty containers should be left open in a well-ventilated area to dry out. When dry, recycle the container through steel can recycle programs such as Paintback.
Feast Watson Surface Restore
Restores tired coated timber
No sanding or stripping required
Protective satin finish
