Feast Watson Spar Marine Varnish
Zoom
Battle the elements with the supreme durability of Feast Watson Spar Marine Varnish.
Our marine-grade, high gloss timber varnish is designed to protect and enhance exterior timber with a water-resistant formula that locks out moisture.
Our homes need to be flexible yet durable to accommodate a busy life. With Feast Watson Spar Marine Varnish, timber is free to bend, twist, expand and contract to adapt to what life throws at it without the coating cracking or splitting.
For maximum water repellency, use over Feast Watson Wood Shield Oil 7-10 days after staining.
Not suitable for application below the water line. Try our marine varnish today for optimal durability and shine!
| Projects |
|
|---|---|
| Sizes |
|
| Where to use |
Marine and exterior timber above the waterline. |
| Recoat time |
12 - 24 hours |
| Coverage rate |
10m² per litre |
| Clean up |
Mineral Turpentine. Soak application cloths in water prior to disposal. |
| Finish |
Gloss |
| Number of coats |
3 Coats |
| Dry time |
24 hours |
How to prepare your timber for Feast Watson Spar Marine.
Let's treat your exterior timber.
How to prepare new timber:
Allow new timber to adapt and adjust to the climate in its final position for 4-6 weeks.
Prepare exterior timber for coating with Feast Watson Woodprep. Sand to a smooth surface.
Remember to remove all sanding dust before coating.
How to prepare weathered timber:
Prepare your exterior weathered or grey timber by cleaning thoroughly with Feast Watson Woodprep.
Sand to a smooth surface and remove all sanding dust before coating.
How to prepare previously coated timber:
Previously coated surfaces need to be taken back to bare timber by sanding timber to a smooth surface.
Remember to remove all sanding dust before coating.
How to apply Feast Watson Spar Marine:
Okay, let's do this! Follow these steps on how to clear coat using Spar Marine:
Thoroughly stir Spar Marine Varnish before and during application with a flat blade stirrer. Take care not to introduce bubbles!
Using a brush, roller or spray, apply Spar Marine Varnish. Spray: If using a spray, the Spar Marine Varnish may be thinned by using 10% mineral turpentine. Roller: If using a roller, use a short nap (5mm) mohair roller. Ensure edges and end grain are fully coated.
Make sure to apply minimum three coats. Four or more coats may be applied for extra durability to withstand extreme exposure, or when the coating has been thinned.
Allow 12 hours drying time between coats. Sand lightly between coats.
The final coat should be applied within 30 hours of the previous coat to ensure timber is protected. Note: Do NOT apply in temperatures under 10 C or above 35 C or when rain or heavy dew is expected within the coating dry time.
How to maintain your timber after using Feast Watson Spar Marine:
As always, regularly monitor the surface for signs of colour loss or surface defects.
Reapply Spar Marine as the timber changes colour or when water repellency is lost due to weathering.
When required, lightly sand the surface and remove sanding dust. Then, recoat with additional coats of Feast Watson Spar Marine Varnish as per application instructions.
Do not pour leftover product down the drain.
Brush leftover product onto newspaper, and allowed to completely dry, before disposing of via general waste collection.
Empty containers should be left open in a well-ventilated area to dry out. When dry, recycle the container through steel can recycle programs such as Paintback.
Feast Watson Spar Marine Varnish
Flexible finish that moves with timber
Helps prevent cracking & splitting
High water repellency & shine
Select colour range
Colour - Clear
