Feast Watson Timber Floor Stain & Varnish - Liming White
Zoom
Nothing creates a bright and open space better than beautiful white wash floorboards.
Feast Watson Timber Floor Stain & Varnish - Liming White delivers a uniquely fresh and sophisticated look, while providing durability and buildable opacity.
Timber Floor Stain & Varnish - Liming White is a professional, clear polyurethane formula for lasting protection and a stunning white shade that doesn't yellow over time.
This product can be used to give you the lime wash floorboards you’re after. Apply up to three coats for your desired level of opacity.
It is a white wash floor varnish and stain that is suitable for bare timber and cork flooring.
| Projects |
|
|---|---|
| Sizes |
|
| Where to use |
Bare timber and cork flooring (existing timber must be sanded back to bear before applying Timber Floor Stain & Varnish - Liming White) |
| Recoat time |
Recoat after 2 hours |
| Coverage rate |
10m² per litre |
| Clean up |
Water |
| Number of coats |
Bare Timber: 3 |
| Dry time |
20 minutes |
How to prepare Feast Watson Timber Floor Stain & Varnish - Liming White:
Before you get coating... Let's prep.
How to prepare New Timber:
Sand to a smooth surface and remove all sanding dust before coating.
TIP: Achieve that super-smooth finish (or if the timber grain is open or coarse) by applying a coat of Feast Watson Sanding Sealer and sand back as per the label instructions.
For naturally oily timbers, seal the timber with Feast Watson Proofseal™ as per the label instructions prior to application.
How to prepare Previously Coated Timber:
Previously varnished surfaces need to be sanded to a dull finish. Remember to remove all sanding dust before coating.
How to apply Feast Watson Stain and Varnish Liming White:
Here we go…
Make sure you love your colour! Using an off-cut or on a inconspicuous area, test the colour to ensure you are happy with your choice.
Make sure the Stain and Varnish Liming White is thoroughly stirred through before starting (and during!). Avoid introducing any bubbles!
Apply Stain & Varnish Liming White using a brush or roller.
If applying by roller, use a short nap (5mm) mohair roller. Ensure edges and end grain are fully coated.
If applying by spray, three coats are required. Three coats are required, if you have achieved your colour after one or two coats, just complete the following coats with a water based interior clear coating as additional coats of Stain & Varnish Liming White will intensify colour.
Provide 2 hours drying time between coats.
Remember to sand lightly between coats with a fine sandpaper to get the best results.
If applying over a previous varnish coating, two coats will be sufficient.
How to maintain my timber with Feast Watson Timber Floor Stain & Varnish - Liming White:
Follow these easy steps:
Keep an eye on the surface for any signs of colour loss or surface defects.
When required, lightly sand the surface, and remember to remove all dust.
Recoat with an additional coat of Clear Varnish as per application instructions.
Feast Watson Timber Floor Stain & Varnish - Liming White
Soft stain
Hardwearing finish
Semi transparent coating - maintains timber grain
Select colour range
Colour - Liming White
