Feast Watson Timber Floor Stain & Varnish - Black Japan
Zoom
Creating black flooring is an art unto itself.
Semi-transparent Feast Watson Timber Floor Stain & Varnish - Black Japan delivers a sleek, spellbinding effect to your space without losing the natural pattern of the timber grain.
This quality Black Japan stain has an oil-based formula and clear polyurethane that is perfect for interior timber and parquetry floors.
With each coat applied, you'll achieve a darker and stronger colour. You get the best in a stunning Black Japan stain which enriches your timber with a special satin finish. Now you can retain some of the timber grain in your black flooring or create an intense, black effect.
See the eye-catching results of this beguiling Black Japan stain and varnish for yourself.
| Projects |
|
|---|---|
| Sizes |
|
| Where to use |
Bare timber and cork flooring (existing timber must be sanded back to bare before coating with Timber Floor Stain & Varnish) |
| Recoat time |
12 hours |
| Coverage rate |
10m² per litre |
| Clean up |
Mineral Turpentine |
| Number of coats |
Bare Timber: 3 |
| Dry time |
|
How to prepare your timber for Timber Floor Stain & Varnish - Black Japan:
First steps, here we go:
How to prepare new or bare timber/cork:
Punch exposed nails below the surface. If you have any holes and imperfections, they should be filled with timber putty.
Sand timber to an even, smooth surface. Remember to vacuum or wipe your surface to remove any sanding dust.
Note: Prepare uncoated cork tiles in accordance with the supplier's recommendation.
How to prepare previously coated timber:
Sand your coated surface back to bare timber.
Remember to remove all sanding dust before coating.
How to apply Timber Floor Stain & Varnish Black Japan:
Let's get that Black Japan look...
Without introducing any bubbles, use a flat blade stirrer and thoroughly stir product both before and during application.
If you are coating a large space and need more than one Timber Floor Stain & Varnish, mix all together in a large container.
Make sure you love your colour choice! Test your colour on an off-cut to ensure that it's right for you.
Using the Feast Watson Floor Finish Applicator, brush or a short nap mohair roller, apply your first coat. Work along 3-4 floorboards at a time, maintaining a wet edge to prevent lap marks and lay off in the direction of the grain. And remember, avoid introducing any bubbles!
Timber Floor Stain & Varnish is a three-coat flooring system, with each coat achieving a darker and stronger Black Japan colour. Continue applying coats by the above procedure, sanding between coats, until you achieve a colour you love.
Note: If you have achieved your desired colour before 3 coats that's okay! Finish off your floor with the Feast Watson Timber Floor Varnish as per label instructions, and you're good to go.
How to maintain your Timber Floor Stain & Varnish Black Japan:
Follow these steps to ensure you maintain your beloved colour:
Regularly clean using Feast Watson Floor Clean.
Ensure you keep an eye on your floor for signs of colour loss or surface defects.
When floor requires an additional coat of Timber Floor Stain & Varnish, apply as per the instructions for Previously Coated Surfaces.
Do not pour leftover product down the drain.
Brush leftover product onto newspaper, and allowed to completely dry, before disposing of via general waste collection.
Empty containers should be left open in a well-ventilated area to dry out. When dry, recycle the container through steel can recycle programs such as Paintback.
Feast Watson Timber Floor Stain & Varnish - Black Japan
Buildable Black Japan colour
Hard wearing finish
Retains the character of the timber grain
Select colour range
Colour - Black Japan
