Feast Watson Timber & Deck Stain
Zoom
Bring your deck back to life with Feast Watson Timber & Deck Stain.
Whether it be a refresh of your existing colour or a new look altogether, our Timber Deck Stain comes in a range of colours to take your outdoor timber to the next level.
Containing a rich oil formula and protective coating, your timber is shielded from the damaging effects of water, mould and harsh UV, while imparting a clean, matt finish.
The good news is you can pick your perfect colour match: Grey Mountain Ash, Black Japan, European Oak, Swan River Jarrah and Taman Merbau (10L only available in Black Japan and Taman Merbau).
Having a deck you can be proud of is possible by using one of Feast Watson's beautiful timber deck finishes. With Feast Watson's Timber & Deck Stain you get the benefits of quality, versatility and a stunning look all at once.
Suitable for decks, interior and exterior doors, windows and trim.
For a luxurious look, coat your timber with Feast Watson Clear Varnish (interior) or Weatherproof Varnish (exterior) for a satin or gloss finish.
| Projects |
|
|---|---|
| Sizes |
|
| Where to use |
Perfect for Decks. Suitable For Interior/Exterior Doors, Windows And Trim. |
| Recoat time |
12 hours |
| Coverage rate |
10m² per litre |
| Clean up |
Mineral Turpentine. Soak application cloths in water prior to disposal. |
| Finish |
Matt |
| Number of coats |
Bare Timber: 2 Maintenance: 1 |
| Dry time |
24 hours |
How to prepare your timber for Timber and Deck Stain:
Let's prepare for your new timber look...
How to prepare new timber:
Allow your new timber to weather for 4-6 weeks before applying.
Ensure your deck is clean and ready to go by applying Feast Watson Woodprep as per the instructions.
For the best-looking deck, sand the surface lightly to remove any grain raise. Don't forget to remove any leftover sanding dust before coating.
How to prepare weathered timber:
Ensure your deck is clean and ready to go with Feast Watson Woodprep.
For the best looking deck, sand your timber slightly to remove any deterioration. Make sure to remove all leftover sand before coating.
How to prepare previously coated timber:
If your deck has previously been coated with a stain or oil, don't fret. You just need to prepare the surface by stripping or sanding back your timber to it's original bare surface.
As always, ensure your timber is clean by using Feast Watson Woodprep, to ensure the best coating results.
How to apply Timber and Deck Stain:
So, how do you achieve your new look? Let’s see!
Ensure that your timber is completely dry before applying the Timber and Deck Stain.
Thoroughly stir Timber and Deck Stain before beginning and during application. Avoid introducing any bubbles!
If you are coating a large space and need more than one quantity of Timber and Deck Stain, mix them all together in a large container.
Apply two coats of Timber and Deck Stain, walking along 3-4 planks at a time, in the same direction as the grain of the deck. Use a brush, spray or Feast Watson floor applicator for application. If you are using a spray, don't forget to back brush the coating to ensure even penetration.
Don’t forget about your edges! They need to be fully coated.
Allow 12 hours of drying between coats.
Congratulations, you now have a beautiful deck!
How to maintain your deck after using the Timber and Deck Stain:
You’ve finished! Well done. Now, how do you keep your deck looking it’s best?
Regularly check on the coated timber to identify any colour loss, dryness or weathering. If this occurs, recoat the timber and it will return to its original beauty.
If you recoat, don’t forget to clean your deck first using Woodprep.
Do not pour leftover product down the drain.
Brush leftover product onto newspaper, and allowed to completely dry, before disposing of via general waste collection.
Empty containers should be left open in a well-ventilated area to dry out. When dry, recycle the container through steel can recycle programs such as Paintback.
Feast Watson Timber & Deck Stain
Protects against water, mould & UV
Rich semi-transparent colour
Matt finish
Select colour range
Colour - Black Japan
Timber type - Merbau
Colour - European Oak
Timber type - Merbau
Colour - Taman Merbau
Timber type - Merbau
Colour - Swan River Jarrah
Timber type - Merbau
Colour - Grey Mountain Ash
Timber type - Merbau
